The Olflex Classic 110 Black cable is a VDE-registered oil-resistant PVC control cable with a black outer sheath.
Suitable for applications include:
- For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
- Dry or damp rooms that are subject to medium mechanical loads
- Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
- In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for the following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors
Classic 110 Black Cable Benefits and Features
- Suitable for outdoor applications
- Wide choice of standardized lengths and individual cuts
- Flame-retardant according IEC 60332-1-2
- Good chemical resistance, see catalogue appendix T1
- Oil-resistant according to DIN EN 50290-2-22 (TM54)
- UV and weather-resistant according to ISO 4892-2
- Fine-wire strand made of bare copper wires
- PVC insulation LAPP P8/1
- Cores twisted in layers
- PVC outer sheath, black (RAL 9005)
Technical Data
|
Classification |
ETIM 5.0 Class-ID: EC000104 ETIM 5.0 Class-Description: Control Cable |
|
Core identification code |
Black with white numbers acc. to VDE 0293-1 |
|
Conductor stranding |
Fine wire according to DIN EN 60228 (VDE 0295), class 5 / IEC 60228 class 5 |
|
Torsion movement in WTG |
TW-0 & TW-1, refer to Appendix T0 |
|
Minimum bending radius |
Occasional flexing: 10 x outer diameter In power chains: 15 x outer diameter Fixed installation: 4 x outer diameter |
|
Voltage |
Nominal: U0/U: 300 / 500 V Test: 4000 V |
|
Protective conductor |
G = with GN-YE protective conductor X = without protective conductor |
|
Temperature range |
Occasional flexing: -15°C to +70°C In power chains: -5°C to +70°C Fixed installation: -40°C to +80°C |