The Unitronic Bus ASI is an AS-INTERFACE cable for networking systems in the field.

This cable has applications including:

  • Communication at the sensor/actuator level
  • Sensor-/actuator wiring
  • For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
  • The TPE version has an oil-resistant outer sheath. It is suitable for wet areas, in particular in conjunction with water-soluble cooling lubricants.

Unitronic Bus ASI Cable Benefits and Features

  • The new BUS ASI LD 2 x 2.5 (Long Distance) allows even modules located further away to be connected. AS-I power supplies can be reduced. The BUS ASI LD is downwards-compatible with version 1.5.
  • The rubber versions are halogen-free
  • Data and power are transmitted via an unscreened, geometrically coded two-core fl at the cable (protection against polarity reversal).
  • The conductor is contacted by “piercing technology” within the ASI modules.
  • The sensors are connected to the ASI modules (coupling modules) using round cables (connection cables).

Technical Data

Cable Identification

ETIM 5.0/6.0 Class-ID: EC000830

ETIM 5.0/6.0 Class-Description: Data cable

Peak Operating Voltage

Yellow: 300 V (not for power applications)

Black: 300 V (not for power applications)

Red: 300 V

Conductor Resistance

1.5 mm²: max. 13.7 Ω/km

2.5 mm²: max. 8.21 Ω/km

Minimum Bending Radius

Fixed installation: 12 mm

Flexible use 24 mm

Test Voltage

Core/core: 2000 V

Temperature Range

Dependent on outer sheath material:

PVC: -30°C to +90°C

Other materials: -40°C to +85°C

During installation:

PVC -20 °C to +90 °C

Other materials:-30 °C to +85 °C

We can't find products matching the selection.