Precisely manufactured by LAPP Group, the H07RN-F cable is a heavy-duty rubber-sheathed cable.

This cable also has applications for numerous industries, such as:

  • Medium, mechanical stress and industrial and agricultural use as well as for handheld and power supply devices (H07RN-F according to EN 50565-2)
  • Drip loop torsion between the nacelle and the tower of wind turbine generators/windmills
  • Outdoors acc. EN 50565-2
  • For buildings or industrial plants with a high density of people or valuable assets

H07RN-F Benefits and Features

  • Arrangements made of single-core, rubber-sheathed cables H07RN-F can be used for short circuit-proof and short-to-ground-proof installations in accordance with IEC 60364-5-52 / HD 60364-5-52 / VDE 0100 Part 520
  • More water-resistant than H07RN-F and H07RN8-F
  • Conductor temperature range more suitable for outdoor installation and wider than H07RN-F, H07ZZ-F, H07BN4-F and NSSHöU
  • Oil-resistant according to EN 60811-404
  • Good resistance to abrasion, atmospheric agents, grease and mineral oils
  • UV-, Ozone- Acc. EN 60811), Cold- (-40°C flexible at the conductor) and Heat- resistant (+90°C at the conductor)
  • Drip loop torsion resistant (wind turbine) ==>TW-0, TW-1 and TW-2; -40°C to +90°C / 2,000 cycles (5,000 cycles from +5°C) / torsion angle of +/-150° per metre at one revolution per minute
  • Long-time water submersion (AD8) down to 100, without interruption (no drinking water, minimum water temperatures of +5°C, standing water only, no areas with boat / ship / submarine traffic)
  • Halogen-free acc. EN 50267-2 (sub-parts -1 and -2), flame-retardant according to IEC 60332-1-2 and low smoke density (LS) acc. EN 61034-2

Technical Data


ETIM 5.0 Class-ID: EC001578

ETIM 5.0 Class-Description: Flexible Cable

Core identification code

Up to 5 cores; colour-coded according to VDE 0293-308, refer to Appendix T9

From 6 cores: black with white numbers

Conductor stranding

Fine wire according to VDE 0295

Class 5 / IEC 60228 Class 5

Torsion movement in WTG

TW0 & TW-2, refer to Appendix T0

Minimum bending radius

Moved: 6 x outer diameter

Fixed installation: 4 x outer diameter


Nominal: U0/U: 450 / 750 V

Test: 2500 V AC

Protective conductor

G = with GN-YE protective conductor

X = without protective conductor

Current rating

According to IEC 60364-5-52 / VDE 0298-4

EN 50565-1 / VDE 0298-565-1

Temperature range

Moved: -40°C to +90°C

Fixed installation: -50°C to +90°C

We can't find products matching the selection.