The Olflex Classic 110 Black cable is a VDE-registered oil-resistant PVC control cable with a black outer sheath.

Suitable for applications include:

  • For fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load
  • Dry or damp rooms that are subject to medium mechanical loads
  • Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
  • In power chains for a travelling distance up to 5 m and 0,2 ... 1 million bending cycles, for the following dimensions: 0,5 to 2.5mm² and 2 to 7 conductors

Classic 110 Black Cable Benefits and Features

  • Suitable for outdoor applications
  • Wide choice of standardized lengths and individual cuts
  • Flame-retardant according IEC 60332-1-2
  • Good chemical resistance, see catalogue appendix T1
  • Oil-resistant according to DIN EN 50290-2-22 (TM54)
  • UV and weather-resistant according to ISO 4892-2
  • Fine-wire strand made of bare copper wires
  • PVC insulation LAPP P8/1
  • Cores twisted in layers
  • PVC outer sheath, black (RAL 9005)

Technical Data


ETIM 5.0 Class-ID: EC000104

ETIM 5.0 Class-Description: Control Cable

Core identification code

Black with white numbers acc. to VDE 0293-1

Conductor stranding

Fine wire according to DIN EN 60228 (VDE 0295), 

class 5 / IEC 60228 class 5

Torsion movement in WTG

TW-0 & TW-1, refer to Appendix T0

Minimum bending radius

Occasional flexing: 10 x outer diameter

In power chains: 15 x outer diameter

Fixed installation: 4 x outer diameter


Nominal: U0/U: 300 / 500 V

Test: 4000 V

Protective conductor

G = with GN-YE protective conductor

X = without protective conductor

Temperature range

Occasional flexing: -15°C to +70°C

In power chains: -5°C to +70°C

Fixed installation: -40°C to +80°C

We can't find products matching the selection.